Technical Data Sheet
High Modulus/Nonconductive Urethane Adhesive
DINITROL®  D-9000

General Description
DINITROL D-9000 is a black,  one- component polyurethane with the following properties:
  • High modulus
  • Nonconductive
  • Cold applied
  • High viscosity
  • Fast curing
The adhesive's high modulus property contributes remarkably to the stiffening increase of the car-body.  The low electric conductivity makes D-9000 most suitable for the replacement of windshields that have an antenna incorporated.  In the case of an aluminum car body, the electric insulating property of the product will prevent the danger of contact corrosion.

Shelf Life
12 months in an unopened cartridge.

Storage Requirements
Recommended storage temperature is between 15°C(60°F) and 30°C(90°F), in closed packaging.
 Packaging                 Part #
10.5 oz Cartridge       D-9000
20.3 oz Foil-Wrap      D-9000FW

Working Time
18 minutes at 23°C(73°F)
and 50% RH

Tensile Strength
>6.9 MPa (1000 psi)

Lap Shear Strength
  • 3 hours >0.7 MPa (100 psi)
  • 24 hours >2.5 MPa (360 psi)
  • 168 hours >5.0 MPa (730 psi)
Shear Modulus
2.5 MPa "at 10% deformation"

Shore Hardness
Shore A 72

Elongation
290%

Electrical Resistivity
>108 Mega-ohms x cm
 Required Pre-Treatment Products
  • D-520 & D-530 or D-528 1-step
  • D-540 PAAS Activator
  • D-560 PVC-Activator (for PVC encapsulated glass)
Installation Options
Full cut leaving 2mm as a base.

 All bonding areas have to be clean, dry and grease free.  The glass side has to be pretreated with the one-step-primer D-528 or with the  system D-520 glass activator  and D-530 glass/paint primer.

Remove the aluminum tab on the bottom of the cartridge. Cut nozzle to meet urethane dimensions as specified by the respective car manufacturer.  Puncture top and attach pre-cut nozzle.  Insert into gun.

If there is no existing urethane on the pinchweld to use as a substrate for D-9000, the one-step-primer  D-528 or the glass/paint primer D-530 should  be applied on the pinchweld for best results.

D-9000 can be applied on the glass or on the pinchweld.

Drive Away With Passenger Side Airbag
Without Passenger Side Airbag
TEMP/RH
 >70%
 >50%
 >30%
 >10%
TEMP/RH >70%
 >50%
 >30%
 >10%
>115°F
(46°C)
 1 hr
 1 hr 1.5 hrs 2 hrs
>115°F
(46°C)		 45 min
 45 min 1 hr 1.5 hrs
>85°F
(30°C)
 1 hr 1 hr 1.5 hrs 2 hrs
>85°F
(30°C)		 45 min 45 min 1 hr 1.5 hrs
>73°F
(23°C)
 1 hr 1 hr 1.5 hrs 2 hrs
>73°F
(23°C)		 45 min 45 min 1 hr 1.5 hrs
>60°F
(15°C)
 1 hr 1 hr 1.5 hrs 1.5 hrs
>60°F
(15°C)		 45 min 45 min 1 hr 1 hr
>50°F
(10°C)
 1 hr 1 hr 1.5 hrs 1.5 hrs
>50°F
(10°C)		 45 min 45 min 1 hr 1 hr
>40°F
(5°C)
 1 hr 1 hr 1 hr 1 hr
>40°F
(5°C)		 45 min 45 min 1 hr 1 hr
>32°F
(0°C)
 1 hr 1 hr 1 hr 1 hr
>32°F
(0°C)		 45 min 45 min 1 hr 1 hr
>23°F
(-5°C)
 1 hr 1 hr 1 hr 1 hr
>23°F
(-5°C)		 45 min 45 min 1 hr 1 hr
>15°F
(-10°C)
 1 hr 1 hr 1 hr 1 hr
>15°F
(-10°C)		 45 min 45 min 1 hr 1 hr
>0°F
(-18°C)
 1 hr 1 hr 1 hr 1 hr
>0°F
(-18°C)		 45 min 45 min 1 hr 1 hr

WARRANTY AND LIMITATION OF LIABILITY
EFTEC AFTERMARKET WARRANTS THE QUALITY OF THE PRODUCT FOR A REASONABLE PERIOD CORRESPONDING TO NORMAL PRACTICE FOR SUCH PRODUCT.  PROVIDED ALWAYS, HOWEVER, THAT THE PRODUCT IS USED AS DIRECTED IN EFTEC AFTERMARKET'S WRITTEN INSTRUCTIONS AND MATERIAL SAFETY DATA SHEETS, WITHIN SHELF LIFE OF PRODUCT AND IN ALL RESPECTS WITH REASONABLE CARE.  EXCEPT AS SET FORTH ABOVE, DINOL EXPRESSLY EXCLUDES ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER EXPRESS OR IMPLIED REPRESENTATIONS AND WARRANTIES PROVIDED BY STATUTE OR COMMON LAW.  USER DETERMINES SUITABILITY OF PRODUCT FOR INTENDED USE AND ASSUMES ALL RISK AND LIABILITY IN CONNECTION THEREWITH.  IN NO EVENT SHALL EFTEC AFTERMARKET BE LIABLE FOR CONSEQUENTIAL, PUNITIVE, SPECIAL, EXEMPLARY OR INCIDENTAL DAMAGES.  THE EXCLUSIVE REMEDY AVAILABLE FOR CLAIMS (INCLUDING BREACH OF WARRANTY, NEGLIGENCE AND STRICT LIABILITY) IS LIMITED TO HAVING THE OPTION OF REPLACEMENT OR REPAYMENT OF THE PURCHASE PRICE FOR THE PRODUCTS WHICH ARE THE SUBJECT OF THE CLAIM.