Technical Data Sheet
DINITROL Glass Activator and Cleaner
DINITROL®  D-530

General Description
D-530 is an original OEM formulated blackout glass, paint primer, bare metal etch primer and used only in conjunction on glass with pre-application of D-520 glass activator and cleaner.

Characteristics
D-530 has the following features:
  • Used both as glass and pinchweld primer.
  • Maintains adhesion of urethane bond during extreme weather conditions
  • Ensures adhesion of urethane bond with all varieties of OEM and after market vehicle glass (On glass D-520 must be applied first before applying D-530.)
  • Blocks 100% of harmful UV rays
  • Ensures urethane bond adhesion to meet or exceed OEM standards.
Shelf Life
12 months in an unopened bottle.

 Storage Requirements
Recommended storage temperature is between 5°C (40°F) and 27°C (80°F).  Keep product in cool and dry locations for best results.

Packaging                            Part #
Black capped bottles
1.0 oz can                              D-530S
4.2 oz can                              D-530M

 Application/Dry Time
10 minutes

Post Application Working Time
Approximately 12 hours

Open Shelf Life
5 weeks after bottle has been opened and lid is kept on tightly.

D-530 should not be used if the product has remained open for an extended amount of time.  The lid must be replaced promptly after each use.

Health and Safety Caution
Wear OSHA and ANZI Z87.1-1989 approved safety goggles and nitrile gloves with any OEM/after market primer.

Working conditions with good ventilation is required.  If this is not possible consult the D-530 Material Safety Data Sheet for recommended options of use during poorly ventilated conditions.



 Glass Application
After proper surface cleaning and surface preparation with the D-520 Glass Activator and Cleaner, wipe on a smooth continuous lane of D-530 to the bonding area of the glass.  Use an acid brush or cotton swab to apply product.  Let dry for 10 minutes at temperatures above 30°F, 20 minutes at temperatures from 0°F to 30°F.

Pinchweld Application
Never compromise the pinchweld by damaging the paint system in the pinchweld.  In the event that the pinchweld becomes scratched and/or metal is exposed, use an acid brush, woolen dauber, or equivalent to apply D-530 on scratches or exposed metal to prevent future corrosion in the pinchweld.  Let dry 10 minutes.  Avoid getting D-530 on the freshly cut urethane.  If larger areas of bare metal are exposed use a clean unused dauber for application.

 In the event that the pinchweld has new paint and no urethane is left in the pinchweld, D-530  should be applied to the bonding surface.  The paint system must be dry and scuffed with fine steel wool before application of D-530.  Use an acid brush, woolen dauber, or equivalent to apply.
*Application  below 0°F is Not Recommended
WARRANTY AND LIMITATION OF LIABILITY
EFTEC AFTERMARKET WARRANTS THE QUALITY OF THE PRODUCT FOR A REASONABLE PERIOD CORRESPONDING TO NORMAL PRACTICE FOR SUCH PRODUCT.  PROVIDED ALWAYS, HOWEVER, THAT THE PRODUCT IS USED AS DIRECTED IN EFTEC AFTERMARKET'S WRITTEN INSTRUCTIONS AND MATERIAL SAFETY DATA SHEETS, WITHIN SHELF LIFE OF PRODUCT AND IN ALL RESPECTS WITH REASONABLE CARE.  EXCEPT AS SET FORTH ABOVE, DINOL EXPRESSLY EXCLUDES ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER EXPRESS OR IMPLIED REPRESENTATIONS AND WARRANTIES PROVIDED BY STATUTE OR COMMON LAW.  USER DETERMINES SUITABILITY OF PRODUCT FOR INTENDED USE AND ASSUMES ALL RISK AND LIABILITY IN CONNECTION THEREWITH.  IN NO EVENT SHALL EFTEC AFTERMARKET BE LIABLE FOR CONSEQUENTIAL, PUNITIVE, SPECIAL, EXEMPLARY OR INCIDENTAL DAMAGES.  THE EXCLUSIVE REMEDY AVAILABLE FOR CLAIMS (INCLUDING BREACH OF WARRANTY, NEGLIGENCE AND STRICT LIABILITY) IS LIMITED TO HAVING THE OPTION OF REPLACEMENT OR REPAYMENT OF THE PURCHASE PRICE FOR THE PRODUCTS WHICH ARE THE SUBJECT OF THE CLAIM.