Technical Data Sheet
High Tack Urethane Adhesive
DINITROL®  D-506

General Description
Dinitrol D-506 is a high modulus, heated, one component urethane adhesive system with the following benefits:
  • High viscosity
  • High modulus
  • Instantaneous green strength
  • OEM product
  • Meets all applicable FMVSS
  • 1 hour drive away at 15°F
  • Crash test proven

Shelf Life
12 months in an unopened cartridge

Storage Requirements
Recommended storage temperature is between 0°C(32°F) and 35°C(95°F) in closed packaging.

Packaging                 Part #
10.5 oz Cartridge       D-506

Working Time
10 minutes at 23°C(73°F) and 50% RH



 Tensile Strength
12 MPa (1740 psi)

Lap Shear Strength
  • 3 hours >1 MPa (145 psi)
  • 24 hours >4.8 MPa (696 psi)
  • 7 days >7.4 MPa (1073 psi)
Shear Modulus
2.1 MPa "at 10% deformation"

Shore Hardness
Shore A 72 ± 5

Elongation
500%

Required Pre-Treatment Products
  • D-520 & D-530 or
  • D-528 1-Step
  • D-540 for PAAS only (VW & Audi glass and to be used with high modulus urethane)
  • D-560 PVC- Activator (for PVC encapsulated glass)
Installation
Heat D-506 for 30 minutes in a Dinitrol approved oven between 140°
and 180°F. Use the full cut method leaving 2mm as a base.


 		All bonding areas have to be clean, dry and grease free.  The glass side has to be pretreated with the one-step primer D-528 or with the system D-520 glass-activator and D-530 glass/paint primer.

Remove the aluminum tab on the bottom of the cartridge.  Cut nozzle to meet urethane dimensions as specified by the respective car manufacturer.  Puncture top and attach pre-cut nozzle.  Insert into gun.

If there is no existing urethane on the pinchweld to use as a substrate for D-506, the one-step primer D-528 or the glass/paint primer D-530 should be applied on the pinchweld for best result.  D-506 can be applied on the glass or on the pinchweld.

CAUTION
If Dinitrol primers are applied in cold conditions extra flash or dry time is required.  See technical data sheets for respective primers.
          Drive Away With Passenger Side Airbag                                            Without Passenger Side Airbag
RH/TEMP >70% >50% >30% >10%
RH/TEMP >70% >50% >30% >10%
>85°F
(30°C)		 1.5 hr
 1.5 hrs
 2 hrs
 2 hrs
>85°F
(30°C)		 1 hr 1 hr 1.5 hrs
 1.5 hrs
>73°F
(23°C)		 1 hr
 1.5 hrs
 1.5 hrs
 2 hrs
>73°F
(23°C)		 45 min
 1 hr 1 hr 1.5 hrs
>60°F
(15°C)		 1 hr 1 hr 1 hr 1 hr
>60°F
(15°C)		 45 min 45 min 45 min 45 min
>50°F
(10°C)		 1 hr 1 hr 1 hr 1 hr
>50°F
(10°C)		 45 min 45 min 45 min 45 min
>40°F
(5°C)		 1 hr 1 hr 1 hr 1 hr
>40°F
(5°C)		 45 min 45 min 45 min 45 min
>32°F
(0°C)
 1 hr 1 hr 1 hr 1 hr
>32°F
(0°C)		 45 min 45 min 45 min 45 min
>23°F
(-5°C)
 1 hr 1 hr 1 hr 1 hr
>23°F
(-5°C)		 45 min 45 min 45 min 45 min
>15°F
(-10°C)
 1 hr 1 hr 1 hr 1 hr
>15°F
(-10°C)		 45 min 45 min 45 min 45 min

WARRANTY AND LIMITATION OF LIABILITY
EFTEC AFTERMARKET WARRANTS THE QUALITY OF THE PRODUCT FOR A REASONABLE PERIOD CORRESPONDING TO NORMAL PRACTICE FOR SUCH PRODUCT.  PROVIDED ALWAYS, HOWEVER, THAT THE PRODUCT IS USED AS DIRECTED IN EFTEC AFTERMARKET'S WRITTEN INSTRUCTIONS AND MATERIAL SAFETY DATA SHEETS, WITHIN SHELF LIFE OF PRODUCT AND IN ALL RESPECTS WITH REASONABLE CARE.  EXCEPT AS SET FORTH ABOVE, DINOL EXPRESSLY EXCLUDES ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER EXPRESS OR IMPLIED REPRESENTATIONS AND WARRANTIES PROVIDED BY STATUTE OR COMMON LAW.  USER DETERMINES SUITABILITY OF PRODUCT FOR INTENDED USE AND ASSUMES ALL RISK AND LIABILITY IN CONNECTION THEREWITH.  IN NO EVENT SHALL EFTEC AFTERMARKET BE LIABLE FOR CONSEQUENTIAL, PUNITIVE, SPECIAL, EXEMPLARY OR INCIDENTAL DAMAGES.  THE EXCLUSIVE REMEDY AVAILABLE FOR CLAIMS (INCLUDING BREACH OF WARRANTY, NEGLIGENCE AND STRICT LIABILITY) IS LIMITED TO HAVING THE OPTION OF REPLACEMENT OR REPAYMENT OF THE PURCHASE PRICE FOR THE PRODUCTS WHICH ARE THE SUBJECT OF THE CLAIM.