Technical Data Sheet
Super Quick Cure Urethane Adhesive
DINITROL®  D-410

General Description
D-410 is a one component black   urethane adhesive system with the following benefits:
  • Ideal for sealing rubber gaskets
  • Primerless to painted surfaces, glass and some synthetic materials
  • Ideal for sealing leaks
  • RV/OEM approved
  • Lynx approved
Shelf Life
12 months in an unopened cartridge

Storage Requirements
Recommended storage temperature is between 15°C(60°F) and 30°C(90°F)

Packaging                  Part #
10.5 oz cartridge         D-410

For special contract accounts this product can be ordered in foil-wrap, pail or 55 gallon drums.  Also available in the following colors: white, red, yellow, and brown.

Working Time
35-45 minutes at 23°C(73°F) and 50% RH
 Tensile Strength
1.5 MPa (220 psi)

Lap Shear Strength
  • 3 hours 0.40 MPa (60 psi)
  • 24 hours 0.80 MPa (115 psi)
  • 7 days 1.8 MPa (260 psi)
Shore Hardness
Shore A 45

Elongation
450%

Supporting Products
  • D-560 PVC-Activator(for PVC encapsulated glass)
Application Options
  • Rubber Gaskets
  • Backfill
  • Molding
  • Quarterlites
  • Bonding

 Adhesive Preparation
  • Remove the aluminum tab on the bottom of the cartridge
  • Puncture top and attach the nozzle
  • Insert into gun
Recommended Installation Conditions
For best results apply product in moderate temperatures, free of moisture and debris.

If bonding or adhesion is desired, pretest bonding surface for adhesion by applying a small amount of D-410 to test area.  Test adhesion after 24 hours using pliers and scraper blade and attempt to peel D-410 from test surface.

Vinyl, HDPE, rubber and some other synthetic materials may require special surface treatment or primers for best adhesion.  Material testing is required for all such substrates.

For special contract accounts, Eftec Aftermarket laboratories may also conduct additional testing as requested to find appropriate application products and procedures.  Otherwise it is the user's responsibility to determine the fitness of any Dinitrol product and application for a particular purpose.

*Application at or below 40°F is Not Recommended
WARRANTY AND LIMITATION OF LIABILITY
EFTEC AFTERMARKET WARRANTS THE QUALITY OF THE PRODUCT FOR A REASONABLE PERIOD CORRESPONDING TO NORMAL PRACTICE FOR SUCH PRODUCT.  PROVIDED ALWAYS, HOWEVER, THAT THE PRODUCT IS USED AS DIRECTED IN EFTEC AFTERMARKET'S WRITTEN INSTRUCTIONS AND MATERIAL SAFETY DATA SHEETS, WITHIN SHELF LIFE OF PRODUCT AND IN ALL RESPECTS WITH REASONABLE CARE.  EXCEPT AS SET FORTH ABOVE, EFTEC AFTERMARKET EXPRESSLY EXCLUDES ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER EXPRESS OR IMPLIED REPRESENTATIONS AND WARRANTIES PROVIDED BY STATUTE OR COMMON LAW.  USER DETERMINES SUITABILITY OF PRODUCT FOR INTENDED USE AND ASSUMES ALL RISK AND LIABILITY IN CONNECTION THEREWITH.  IN NO EVENT SHALL EFTEC AFTERMARKET BE LIABLE FOR CONSEQUENTIAL, PUNITIVE, SPECIAL, EXEMPLARY OR INCIDENTAL DAMAGES.  THE EXCLUSIVE REMEDY AVAILABLE FOR CLAIMS (INCLUDING BREACH OF WARRANTY, NEGLIGENCE AND STRICT LIABILITY) IS LIMITED TO HAVING THE OPTION OF REPLACEMENT OR REPAYMENT OF THE PURCHASE PRICE FOR THE PRODUCTS WHICH ARE THE SUBJECT OF THE CLAIM.